6.0
Maintenance and Service
7.0
Trouble-shooting
Malfunction
Chair does not start up
In the case of any malfunction, please immediately inform your authorised ATMOS service.
Possible cause
– Mains plug is not connected correctly
– No mains voltage
– Defective fuse
The chair does not require any maintenance. However, a blown
out fuse may occur and require replacement (see Chapter
6.1).
In case of malfunctions, please contact your local
authorized ATMOS service technician.
6.1
Fuse exchange
●
To open the fuse socket
rotate top counter clockwise
●
Exchange of fuse
●
To close fuse socket, rotate top cw.
Before commencing this job, make sure to
disconnect the device from line power.
Solution
– Check connection at the socket
– Check house fuse
– Check mains plug on perfect fi t at the
device
– Exchange the fuse
15