Table of Contents
Advertisement
5.0
Cleaning
5.1 General information on cleaning and disinfection
Before cleaning
Medical devices must always offer a maximum in safety and function.
We therefore recommend:
Prior to each application:
The described measures to clean and to disinfect
or sterilize do not rule out regulations valid for the
particular company!
In chapter 5.3 and 5.4 all surface and
instrument disintectants are stated which
are suitable for disinfection.
5.2 Cleaning the unit's surfaces and upholstery
If liquid has penetrated the unit, it may not be operated again until it has been checked by the authorised customer
service centre.
●
The surfaces of the ATMOS Patient chair E 2 are resistant against all the recommended surface disinfectants stated
!
in chapter 5.3 and 5.4. Nevertheless after any length of time discolourations could possibly develop. Polar solvents
(e.g. acetone or chlorinated hydrocarbons (CCs)) may not be used for cleaning and disinfecting.
Prior to cleaning and surface disinfection, please disconnect the chair from the mains supply.
●
The unit itself can be wiped off with a moist (not wet) cloth.
●
Substances such as blood need to be removed immediately to prevent stains on the cover material of the uphol-
stery.
Do not use any abrasive cleaning agents. For the upholstery usual dry foam may be used. Treatment with a commonly
!
used care product for artifi cial leather is recommended once a week in order to keep the upholstery soft and smooth.
if
necessary
Always observe the concentration specifi cations
and instructions by the respective manufacturer
Do NOT use
•
disinfectants containing concentrated organic
or anorganic acids or bases, since these may
cause corrosion damages.
•
disinfectants containing chloramides, phenol
derivatives or anionic tensides, since these may
cause stress cracks in the plastics used.
13
Advertisement
Table of Contents
