Canopy Installation - Casablanca General Owner's Manual

Casablanca general ceiling fans: owners manual

Hide thumbs

Table Of Contents

Table of Contents

OUTSIDE USA - SECONDARY SUPPORT

Step 5. Attach the canopy to the crossbar mounting bracket behind the

installed outlet adaptor plate with three of the 8-32 x 2

screws and lock washers provided with your Casablanca fan. Hand tighten

until snug against the ceiling.

Note: On sloped ceilings, align the canopy opening toward the top or peak

of the room.

CABLE

Step 6. Attach the spring

lock hook to the fan cable

by depressing the spring

lock and clipping onto the

loop at the end.

OUTSIDE USA - SECONDARY SUPPORT

Step 7. To hang the fan body in the canopy, hold the fan

body firmly and insert the nylon ball into the canopy open-

ing. Rotate fan body until slot on nylon ball fits into pin

opposite canopy opening.

Step 8. Attach the fan wires to the ceiling outlet box wiring

by twisting the bare ends of the wiring together:

• White wire from fan to white NEUTRAL wire in ceiling out-

let box.

• Black wire and blue wire (3-Speed fan only) from fan to

black (or red) POWER wire in ceiling outlet box.

• Green leads from crossbar mounting bracket and fan to

grounding conductor of power source.

Secure by threading on the wire nuts provided with the fan.

OUTSIDE USA - SECONDARY SUPPORT

Step 9. Attach the fan cable to outlet box cable with the

spring lock hook. Make sure the spring lock is tightly closed.

Step 10. Tuck the wires into the canopy with the wire nuts

pointed upward, so that the white and black wires are on

opposite sides of the canopy and all wires are clear of the

canopy opening. Tuck the extra cable and screw lock hook

into the canopy.

NOTE: International fans and light fixtures are supplied

with plug and socket connectors. Substitute these connectors

for the wire nuts shown throughout this manual.

FAN

SPRING

LOCK

SPRING

LOCK HOOK