Casablanca General Owner's Manual page 8

BEFORE INSTALLING THE BLADE HOLDERS & BLADES
Step 8. Check your fan and identify if it is a Direct Drive or XLP Motor.
BLADE
BLADE
HOLDER
SWITCH
HOUSING
Direct Drive
Blade holders attach directly to the motor unit.
COMMODORE STYLE
BLADE SCREW
(3 PER BLADE)
CUP WASHER
COMM0DORE BLADE HOLDER & BLADE INSTALLATION
Step 8a. Commodore Post Style
Attach the blades to the blade holders
with the three countersunk blade
screws and cup washers provided for
each blade.
Hand tighten securely.
Insert the blade holder shaft into the
motor flywheel so that the notch lines
up with the brass blade holder screw.
Hand tighten securely.
BRASS BLADE HOLDER SCREW
(1 PER BLADE HOLDER)
8
DIRECT
DRIVE
MOTOR
PAIRS OF
BLADE
HOLDER
HOLES
THREADED
DIRECTLY
INTO THE
MOTOR
BLADE HOLDERS & HARDWARE
CENTER STYLE
BLADE HOLDER SCREW
(2 PER BLADE)
BLADE SCREW
(4 PER BLADE)
STEEL WASHER
MOTOR
FLYWHEEL
BLADE
BLADE
HOLDER
XLP Motor
Blade holders attach to a flexible flywheel.
BADGE STYLE
BADGE
BLADE HOLDER SCREW
(2 PER BLADE)
BLADE SCREW
(4 PER BLADE)
BLADE HOLDER
INDENTATION
XLP MOTOR
USE
ROUND
HOLES
FOR 5
BLADES
FLYWHEEL
SWITCH
HOUSING
STANDARD STYLE
BLADE HOLDER SCREW
(2 PER BLADE)
BLADE SCREW
(3 PER BLADE)
FIBER WASHER (NOT
INCLUDED IN DAMP
LOCATION FANS)
BLADE SCREW
(3 PER BLADE)
CUP WASHER
(3 PER BLADE)