Casablanca General Owner's Manual page 21

Casablanca general ceiling fans: owners manual
Table of Contents

Advertisement

Pressing the
button will change the direction of rotation. An audio tone signals
the beginning of the reverse sequence and you will see the airflow direction arrow
changing. The fan gradually slows to a stop, then reverses direction.
Note: This function does not operate if the fan is not running.
In the Auto Speed mode, fan speed changes in response to changes in room tempera-
ture. Push the
button to start. The words 'AUTO SPEED' show on the display. Set
the fan speed to the speed at which you are most comfortable. Once set, the fan will
increase or decrease by one speed for each 1.5 F increase or decrease in temperature.
If temperature decreases enough to turn the fan OFF, the Auto Speed indicator will
flash slowly to remind you that the fan will turn on when the temperature increases.
Note: The temperature displayed is from an electronic thermometer
built into the remote control that reads room temperature. It is not
a thermostat that controls the room temperature.
To cancel Auto Speed, simply push the
Selecting
also cancels Auto Speed.
The Saver mode will automatically turn lights off 1 hour after the
lights are turned on. Press the
the display. An audio tone will warn you 20 seconds before the pro-
gram is going to turn the lights off. Press the
cancel.
The Winter mode provides draft-free recirculation of heated air. Press
to activate, and the word 'WINTER' is indicated. This puts the
fan in the upward airflow direction at the fan's lowest speed. Every ten
minutes the fan will increase to speed 3 for ten seconds before return-
ing to the lowest speed.
Pressing any button on the remote will cancel the
'Winter' mode; except using the light functions.
Pressing the
button will start the Security lighting pro-
gram. The controller beeps and indicates 'SECURITY'. The light
will automatically turn ON and OFF in a seemingly random man-
ner over an eight and a quarter hour programmed cycle that is
designed to give the home a "lived-in" look.
Regardless of the light setting when switching to the Security
mode (lights on or off, dim or bright), the lights will increase
to high brightness and then begin the Security cycle. This cycle
is then repeated continuously until cancelled by pressing the
button.
At any time during the Security mode you may adjust the fan
speed, reverse the direction, operate in Auto Speed or Winter,
use Saver or run the Test mode without affecting Security mode.
You may still turn the light ON and OFF (or OFF and ON) manu-
ally for temporary lighting, but the light will continue to operate
automatically at its programmed times.
REVERSE FEATURE
AUTO-SPEED FEATURE
button again.
SAVER FEATURE
button and 'SAVER' will appear in
button again to
WINTER FEATURE
SECURITY FEATURE
REVERSE
AUTO SPEED
TEMPERATURE ACCURACY –3 F
SAVER
WINTER
SECURITY
SECURITY
AUTO
SAVER
Replace batteries when "Lo" is displayed
AUTO-SPEED:
SECURITY:
SECURITY
REVERSE:
SAVER:
Lights turn OFF after 1 hour
TEST:
Tests all fan and light functions
WINTER:
Draft-free heat recirculation
SECURITY MODE CYCLE
1. On for 30 minutes (80% bright)
2. Off for 30 minutes
3. On for 120 minutes (50% bright)
4. Off for 60 minutes
6
5
4
3
2
1
SECURITY
REVERSE
TEST
WINTER
Thermostatic fan speed control
Lights ON and OFF automatically
Change airflow up or down
5. On for 60 minutes (100% bright)
6. Off for 120 minutes
7. On for 15 minutes (20% bright)
8. Off for 60 minutes
21
R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents