Casablanca General Owner's Manual page 9

Step 8b. Center Style
Attach the blades to the
blade holders with the four
blade screws and steel
washers provided for each
blade.
Hand tighten securely.
Install the assembled blade
and blade holder to the fly-
wheel (round holes) or direct
drive motor.
Hand tighten securely.
Repeat for each assembly.
Step 8c. Badge Style
Attach the blades to the blade
holders by first pressing the blade
badge into the blade, then install-
ing the blade holder using the
four blade screws provided for
each blade.
Hand tighten securely.
Install the assembled blade and
blade holder to the flywheel
(round holes) or direct drive mo-
tor.
Hand tighten securely.
Repeat for each assembly.
Step 8d. Classic Style
Attach the blades to the blade
holders with the three blade screws
and felt washers provided for each
blade.
Hand tighten securely.
Install the assembled blade and
blade holder to the flywheel (round
holes) or direct drive motor.
Hand tighten securely.
Repeat for each assembly.
WARNING: To reduce the risk of personal injury, do not bend blade holders when installing,
balancing, or cleaning. Do not insert foreign objects between rotating fan blades.
PROCEED TO YOUR FAN'S CONTROL FEATURE SECTION FOR INSTALLATION/OPERATING INSTRUCTIONS:
3-SPEED - PAGE 12 | INTELI•TOUCH - PAGE 14 | VERSA•TOUCH - PAGE 17 | COMFORT•TOUCH - PAGE 19
CENTER STYLE BLADE HOLDER & BLADE
BLADE HOLDER SCREW
(2 PER BLADE HOLDER)
BADGE STYLE BLADE HOLDER & BLADE
BLADE HOLDER SCREW
(2 PER BLADE HOLDER)
CLASSIC STYLE BLADE HOLDER & BLADE
BLADE HOLDER
SCREW
(2 PER BLADE
HOLDER)
BADGE STYLE
BLADE HOLDER
BLADE
BADGE
BLADE
BLADE SCREW
(4 PER BLADE)
STEEL WASHER
(4 PER BLADE)
BLADE SCREW
(4 PER BLADE)
BLADE
BLADE SCREW
(3 PER BLADE)
FELT WASHER
(3 PER BLADE)
9