Download  Print this page

I Attaching 4 Hole Buttons; I Attaching A Shank To The Button - Brother NC21SE Operation Manual

Computerized sewing and embroidery machine.
Hide thumbs

Advertisement

SEWING THE STITCHES

I Attaching 4 Hole Buttons

Sew the two holes closest to you. Then raise the
presser foot and move the fabric so that the needle
goes into the next two holes, and sew them in the
same way.

I Attaching a Shank to the Button

a
a
a
a
Pull the shank lever toward you before
sewing.
a Shank lever
b
b
b
b
Pull the two ends of the upper thread
between the button and the fabric, wind
them around the shank, and then tie them
firmly together.
108
c
c
c
c
a Feed dog position switch
d
d
d
d
a
Tie the ends of the bobbin thread from the
beginning and end of sewing together on
the wrong side of the fabric.
Note
• When sewing is completed, be sure to return
the feed dog position switch to its original
position.
a
Cut off any excess thread.

Advertisement

Table of Contents

   Also See for Brother NC21SE

   Related Manuals for Brother NC21SE

Comments to this Manuals

Symbols: 0
Latest comments: