Brother NC21SE Operation Manual page 96

SEWING THE STITCHES
b b
b b
Press
motion sewing mode.
→ The key appears as
raised to the necessary height for free-motion
sewing.
c c c c
Select any of the following stitches.
→ Free-motion quilting foot "C" is indicated in the
upper-left corner of the screen.
84
to set the machine to free-
, and the quilting foot is
d d d d
Remove the presser foot holder (see page
38).
e e
e e
Attach free-motion quilting foot "C" at the
front with the presser foot holder screw
aligned with the notch in the quilting foot.
a
b
a Presser foot holder screw
b Notch
Note
Make sure that the quilting foot is attached
properly and not slanted.
f f f f
Hold the quilting foot in place with your
right hand, and tighten the presser foot
holder screw using the screwdriver with
your left hand.
a
a Presser foot holder screw
CAUTION
• Be sure to securely tighten the screws with the
included screwdriver. Otherwise, the needle
may touch the quilting foot, causing it to bend
or break.