Download  Print this page

Using Stored Custom Stitches; Storing Custom Stitches In Your List; I If The Memory Is Full - Brother NC21SE Operation Manual

Computerized sewing and embroidery machine.
Hide thumbs

Advertisement

USING STORED CUSTOM STITCHES

Storing Custom Stitches in Your
List
Stitch patterns created using the MY CUSTOM
STITCH
function can be stored for later use.
Once you finish entering the stitch data, press
. The "Saving" message appears and the
stitch will be stored.
Before storing a stitch, press
run of the stitch.
Memo
• Storing a stitch pattern takes a few seconds.
• For details on retrieving a stored stitch pat-
tern, see page 234.
Note
• Do not turn off the machine while the "Sav-
ing" message is displayed, otherwise the
stitch pattern data being saved may be lost.

I If the Memory is Full

If the following message appears after
pressed, the stitch pattern cannot be stored because
either the machine's memory is full or the stitch
pattern being stored is larger than the amount of
space available in the memory. To be able to store
the stitch pattern in the machine's memory, a
previously stored stitch pattern must be deleted.
to sew a test-
USING STORED CUSTOM STITCHES
Note
To save custom stitches to USB media or in
the computer, follow the previously described
procedure to store the custom stitch, and then
press
to select the stitch (see the fol-
lowing "Retrieving Stored Stitches" section).
Press
to save the stitch to USB media
or in the computer. (For details, see "Saving
Stitch Patterns to USB Media (Commercially
Available)" on page 138 or "Saving Stitch Pat-
terns in the Computer" on page 139.)
is
7
233

Advertisement

Table of Contents

   Also See for Brother NC21SE

   Related Manuals for Brother NC21SE

Comments to this Manuals

Symbols: 0
Latest comments: