Download  Print this page

Brother NC21SE Operation Manual Page 259

Computerized sewing and embroidery machine.
Hide thumbs

Advertisement

This message is displayed when
the "Start/Stop" button is pushed
and the machine is in
embroidery mode, but the
embroidery unit is not attached.
This message is displayed when
you try to recall or save a pattern
while no USB media is loaded.
This message is displayed when
you try to use incompatible
media.
This message is displayed when
you attempt to select a pattern
after the USB media in which the
pattern is saved has been
changed.
This message is displayed when
an error occurs with the USB
media.
ERROR MESSAGES
This message is displayed while
the USB media is transmitting.
This message is displayed when
the memory is full and a pattern
must be deleted.
This message is displayed when
the "Presser Foot Lifter" button is
pushed while the presser foot
lever is raised/the needle is
lowered.
This message is displayed if
some malfunction occurs.
This message is displayed when
you try to sew with a stitch other
than a middle needle position
stitch while the single-hole
needle plate is installed.
This message is displayed when
the needle plate is removed with
the machine on or when the
machine is turned on in the
embroidery or embroidery edit
mode.
8
247

Advertisement

Table of Contents

   Also See for Brother NC21SE

   Related Manuals for Brother NC21SE

Comments to this Manuals

Symbols: 0
Latest comments: