Download  Print this page

Brother NC21SE Operation Manual Page 76

Computerized sewing and embroidery machine.
Hide thumbs

Advertisement

SEWING THE STITCHES
a
a
a
a
Select a stitch.
b
b
b
b
Attach presser foot "J".
*
Attach presser foot "N" when you select
c
c
c
c
Hold the thread tails and fabric with your
left hand, and turn the handwheel with
your right hand to insert the needle into the
fabric.
a Sewing start position
d
d
d
d
Lower the presser foot, and hold the
"Reverse/Reinforcement Stitch" button to
sew 3-4 stitches.
→ The machine sews reverse stitches (or reinforcement
stitches).
e
e
e
e
Press the "Start/Stop" button to sew
forward.
a
a Reverse stitches
→ The machine will begin sewing slowly.
64
Be sure the needle does not strike a basting pin, or
any other objects, during sewing. The thread
could tangle or the needle could break, causing
injury.
f
f
f
f
When sewing is completed, hold the
"Reverse/Reinforcement Stitch" button to
sew 3-4 reverse stitches (or reinforcement
stitches) at the end of the seam.
.
g
g
g
g
After sewing, press the "Thread Cutter"
button to trim the threads.
a
Memo
CAUTION
When the automatic thread cutting and auto-
matic reinforcement stitch keys on the screen
are selected, reverse stitches (or reinforce-
ment stitches) will be sewn automatically at
the beginning of sewing when the "Start/Stop"
button is pressed. Press the "Reverse/Rein-
forcement Stitch" button to sew reverse
stitches (or reinforcement stitches) and trim
the thread automatically at the end of sewing.

Advertisement

Table of Contents

   Also See for Brother NC21SE

   Related Manuals for Brother NC21SE

Comments to this Manuals

Symbols: 0
Latest comments: