Attaching 4 Hole Buttons; Attaching A Shank To The Button - Brother Isodore„ Innov-ís 5000 Operation Manual

Computerized sewing and embroidery machine
Hide thumbs Also See for Isodore„ Innov-ís 5000:
Table of Contents

Advertisement

■ Attaching 4 Hole Buttons

Sew the two holes closest to you. Then raise the
presser foot and move the fabric so that the needle
goes into the next two holes, and sew them in the
same way.

■ Attaching a Shank to the Button

a
Pull the shank lever toward you before
sewing.
a Shank lever
b
Pull the two ends of the upper thread
between the button and the fabric, wind
them around the shank, and then tie them
firmly together.
c
a Feed dog position switch
a
SEWING THE STITCHES
Tie the ends of the bobbin thread from the
beginning and end of sewing together on
the wrong side of the fabric.
Note
• When sewing is completed, be sure to return
the feed dog position switch to its original
position.
a
3
91

Advertisement

Table of Contents
loading

This manual is also suitable for:

882-s96

Table of Contents