Download  Print this page

Changing The Presser Foot; Removing The Presser Foot; Attaching The Presser Foot - Brother NC21SE Operation Manual

Computerized sewing and embroidery machine.
Hide thumbs

Advertisement

CHANGING THE PRESSER FOOT

• Always press
"Start/Stop" button or another button is pressed, the machine will start and may cause injury.
• Always use the correct presser foot for the selected stitch pattern. If the wrong presser foot is used, the
needle may strike the presser foot and bend or break, and may cause injury.
• Only use presser feet made for this machine. Using other presser feet may lead to accident or injury.

Removing the Presser Foot

a
a
a
a
Press the "Needle Position" button to raise
the needle.
b
b
b
b
Press
.
*
If "OK to automatically lower the presser foot?"
appears on the LCD screen, press OK to continue.
→ The entire screen becomes white, and all keys and
operation buttons are locked.
c
c
c
c
Raise the presser foot lever.
d
d
d
d
Press the black button on the presser foot
holder and remove the presser foot.
a
b
a Black button
b Presser foot holder
CAUTION
on the screen before changing the presser foot. If
CHANGING THE PRESSER FOOT

Attaching the Presser Foot

CAUTION
• Make sure that the presser foot is installed in
the correct direction, otherwise the needle
may strike the presser foot, breaking the
needle and causing injuries.
a
a
a
a
Place the new presser foot under the
holder, aligning the foot pin with the notch
in the holder. Lower the presser foot lever
so that the presser foot pin snaps into the
notch in the holder.
a Notch
b Pin
b
b
b
b
Press
to unlock all keys and
buttons.
c
c
c
c
Raise the presser foot lever.
is not pressed and the
a
b
1
37

Advertisement

Table of Contents

   Also See for Brother NC21SE

   Related Manuals for Brother NC21SE

Comments to this Manuals

Symbols: 0
Latest comments: