Selecting Patterns From Embroidery Cards; Selecting Patterns From Usb Media/Computer; I About Embroidery Cards (Sold Separately) - Brother NC21SE Operation Manual

SELECTING PATTERNS
e e e e
Proceed to see "VIEWING THE SEWING
SCREEN" on page 155 to embroider the
pattern.
* To return to the previous screen to select another
pattern, press
Selecting Patterns from
Embroidery Cards
I About Embroidery Cards
(Sold Separately)
• Use only embroidery cards manufactured for this
machine. Using unauthorized cards may cause
your machine to operate incorrectly.
• Embroidery cards sold in foreign countries
cannot be used with this machine.
• Store embroidery cards in the hard case.
Note
• Only insert or remove the embroidery card
when
machine is turned off.
• Do not insert the card in a direction other
than that shown by the arrow on the card,
and do not force the card into the slot
strongly. Do not put any object except for the
embroidery cards into the slot. Otherwise,
your machine may be damaged.
154
.
is displayed, or when the
a a a a
Insert the card completely into the slot on
the right side of the machine.
* Insert the embroidery card so that the end with a
printed arrow is facing the front.
b b b b
Press .
→ The patterns on the embroidery card are displayed
on the selection screen.
c c
c c
Follow the steps on page 151 to select a
pattern.
Selecting Patterns from USB
media/Computer
To recall patterns from the computer or USB
media, see pages 191 through 193.