Download  Print this page

I When Sewing Straight Stitches While Using The Side Cutter - Brother NC21SE Operation Manual

Computerized sewing and embroidery machine.
Hide thumbs

Advertisement

SEWING THE STITCHES
I When Sewing Straight Stitches
While Using the Side Cutter
The seam margin should be approximately 5 mm
(approx. 3/16 inch).
a
a Seam margin
Memo
• The fabric will not be cut if the whole fabric is
simply spread out underneath the presser
foot guide plate. Set the fabric as explained
f
in step
then start sewing.
• One layer of 13 oz. denim can be cut.
• Clean the side cutter after use to avoid hav-
ing dust and scraps of thread build up on it.
• Add a small amount of oil as required to the
cutting edge of the cutter.
78
from the previous section, and

Advertisement

Table of Contents

   Also See for Brother NC21SE

   Related Manuals for Brother NC21SE

   Related Content for Brother NC21SE

Comments to this Manuals

Symbols: 0
Latest comments: