Embroidering Small Fabrics Or Fabric Edges; I Using The Embroidery Sheet; I Embroidering Small Fabrics; I Embroidering Edges Or Corners - Brother NC21SE Operation Manual

PREPARING THE FABRIC
e e e e
Return the frame adjustment screw to its
initial position.

I Using the Embroidery Sheet

When you want to embroider the pattern in a
particular place, use the embroidery sheet with the
frame.
a a a a
With a chalk pen, mark the area of the
fabric you want to embroider.
a Embroidery pattern
b Mark
b b
b b
Place the embroidery sheet on the inner
frame. Align the guide lines on the
embroidery sheet with the mark you made
on the fabric.
a
a Inner frame
b Guide line
c c c c
Gently stretch the fabric so there are no
folds or wrinkles, and press the inner frame
into the outer frame.
a Inner frame
b Outer frame
160
d d d d
Use an embroidery stabilizer to provide extra
support. After embroidering, remove the stabilizer
carefully. Attach the stabilizer as shown in the
a
examples below. We recommend using a
stabilizer for embroidery.

I Embroidering Small Fabrics

b
b

I Embroidering Edges or Corners

a
b
Remove the embroidery sheet.
Embroidering Small Fabrics or
Fabric Edges
Use a temporary spray adhesive to adhere the small
piece of fabric to the larger piece in the frame.
If you do not wish to use a temporary spray
adhesive, attach the stabilizer with a basting stitch.
a Fabric
b Stabilizer
Use a temporary spray adhesive to adhere the small
piece of fabric to the larger piece in the frame.
If you do not wish to use a temporary spray
adhesive, attach the stabilizer with a basting stitch.
a b
a Fabric
b Stabilizer
a
b