Download  Print this page

Designing A Stitch - Brother NC21SE Operation Manual

Computerized sewing and embroidery machine.
Hide thumbs

Advertisement

DESIGNING A STITCH

DESIGNING A STITCH
By using the MY CUSTOM STITCH
can register stitches you have created yourself.
You can also sew designs combining MY
CUSTOM STITCH
characters (see page 128).
Memo
• Stitches that you create with MY CUSTOM
STITCH
(approx. 9/32 inch) wide and 37 mm
(approx. 1-1/3 inches) long.
• Stitches can be designed more easily with
MY CUSTOM STITCH
stitch on the included grid sheet.
a
a
a
a
Draw the stitch design on the grid sheet
(part code SA507, X81277-001).
Memo
Simplify the design so that it can be sewn as a
continuous line. For a more attractive stitch,
close the design by intersecting lines.
If the design is to be repeated and linked, the
start point and end point of the design should
be at the same height.
226
function, you
creations with built-in
can be a maximum of 7 mm
if you first draw the
b
b
b
b
Decide the spacing of the stitch.
*
By adjusting the spacing of a stitch, you can create
various patterns with one stitch.
c
c
c
c
Place points where the pattern intersects
with the grid, and connect all the points
with a line.
d
d
d
d
Determine the x and y coordinates of each
of the marked points.
Memo
This will determine the stitch design that will
be sewn.

Advertisement

Table of Contents

   Also See for Brother NC21SE

   Related Manuals for Brother NC21SE

Comments to this Manuals

Symbols: 0
Latest comments: