Mic 50 Fuses (Up To Serial No. 200226); Mic 70 Fuses - Kärcher MIC 50 Manual

12.9 MIC 50 fuses (up to serial no. 200226)

1. The fuses are located on a board behind the cover, on the
right-hand side of the driver cabin.
Clamping lever
1
Cover
2
2. Open the right-hand door of the driver cabin.
3. Open the clamping lever.
4. Remove the cover.
Fuses
1
Fuse tester with green LED
2
Note
Only works when the main switch is switched on
5. Pull out the supposedly defective fuse.
6. Insert the fuse in a fuse tester, and check it.
If the green LED lights up, then the fuse is not damaged.
If the green LED does not light up, then the fuse is defective.
78
7. Replace a defective fuse with a new fuse using the nominal
value specified in the table.
8. Attach the cover.
9. Actuate the clamping lever.
10.Close the door.
12.10 MIC 70 fuses (MIC 50 starting from serial no.
200227)
1. The fuses are located on a board behind the cover, on the
right-hand side of the driver cabin.
Clamping lever
1
Cover
2
2. Open the right-hand door of the driver cabin.
3. Actuate the clamping lever.
4. Remove the cover.
Fuses
1
Fuse tester with green LED
2
Note
Only works when the main switch is switched on
English