Help With Errors; Malfunctions With Mic 50 Display; Malfunctions With Mic 70 Display - Kärcher MIC 50 Manual

You can rectify minor faults yourself using the following overview.
If in doubt, please consult the authorised customer service.
DANGER
Risk of electric shock
Turn off the appliance and remove the key prior to any care and
maintenance work.

13.8 Malfunctions with MIC 50 display

Malfunction
Warning light for en-
gine temperature lights
up
Warning light for hy-
draulic oil temperature
lights up
Warning light for bat-
tery lights up

13.9 Malfunctions with MIC 70 display

Malfunction
+ Code P0217
Code P0217
82

Help with errors

Cause
Engine temperature too high
Hydraulic oil temperature too high / low
Battery is not charging
Cause
Engine temperature too high
Hydraulic oil temperature too high
Hydraulic oil temperature too low
Battery is not charging
Fault has many causes
Fault in the drive
Fault has many causes
Repair work and work on the electrical components may only be
performed by an authorised Customer Service.
Remedy
 Set the engine speed to idle mode.
 Clean the radiator.
 Check the level of coolant in the engine (when the en-
gine is switched off).
If the warning light does not go out within 5 minutes,
switch off the engine and call Customer Service.
 Hydraulic oil temperature too high: Operate the engine
in idling mixture (supply) until the warning light goes
out.
 Hydraulic oil temperature too low: Cautiously warm up
the engine until the warning light goes out.
 Call Customer Service.
Remedy
 Set the engine speed to idle mode.
 Clean the radiator.
 Check the level of coolant in the engine.
If the warning light does not go out within 5 minutes,
switch off the engine and call Customer Service.
 Operate the engine in idling mixture (supply) until the
warning light goes out.
 Cautiously warm up the engine until the warning light
goes out.
 Call Customer Service.
 Call Customer Service.
 Call Customer Service.
 Call Customer Service.
English