Regeneration <Stage 3; Regeneration <Stage 4; Regeneration <Stage 5; Regeneration <Parked Stage - Kärcher MIC 50 Manual

Regeneration <Stage 3>
ATTENTION
By now at the latest, the regeneration process has to be started.
Stage 3: Only a <Parked Regeneration> is possible now. The ve-
hicle can only drive at a limited speed.
Note
The regeneration process <Parked Regeneration> is described
in a later chapter.
13.5 Regeneration <Stage 4>
ATTENTION
Regeneration must be carried out by Kärcher-Service or by an
authorised Kubota workshop.
Stage 4: The vehicle can only drive at a limited speed.
IMPORTANT: Drive the vehicle to the next safe place and park it.
13.6 Regeneration <Stage 5>
ATTENTION
Regeneration is no longer possible. The diesel particulate filter
must be exchanged and the control program needs a restart. This
is only possible through Kärcher Service or through an author-
ised Kubota workshop.
80
Stage 5 and last stage: The vehicle can only drive at a limited
speed.
IMPORTANT: Drive the vehicle out of the hazard zone of the traf-
fic, and to the next safe place and park it.
13.7 Regeneration <Parked Stage>
Regeneration is only possible if the following conditions are met.
As soon as a condition is changed, the regeneration process will
stop.
 Neutral position
 Parking brake activated (automatic in neutral position)
 No display of error codes
 Accelerator not actuated
ATTENTION
Never interrupt the regeneration process, unless it is urgently
needed!
1. Drive to a safe place.
2. Park the vehicle in neutral position.
Text message: <Place in Park or Neutral>
3. Select idle speed.
4. Depending on the display, press <Un-inhibit Regen> or <Inhib-
it Regen>.
English