Weld Assist View - Kemppi Master 315 Operating Manual

3.2.2 Weld Assist view

Weld Assist is a wizard-like utility for easy selection of welding parameters. The utility walks the user step-by-step
through the selection of required parameters, presenting the selections in an easily understandable way for a non-
technical user.
The Weld Assist feature is available with both MMA and TIG welding. In Weld Assist, the selections are made with the
control knob (1) and with the two function buttons (2, 3):
Tip: You can go back step by step in Weld Assist by pressing the left function button (2). Selecting Cancel with
the right function button (3), you can cancel Weld Assist recommendations and return to the beginning.
Using Weld Assist with MMA welding
1. Go to the Weld Assist view and select 'Start' with the control knob button (1).
2. Select:
>> The electrode type: Fe-Basic / Fe-Rutile / High Eff. / Ss (stainless steel)/Inox / Cellulosic.
>> The electrode diameter (1.6 ... 6 mm).
>> The welding joint type: butt joint / corner joint / lap joint / fillet joint / tube joint / tube+plate joint.
© Kemppi
25
Master 315
Operating manual - EN
1921530 / 2052