To adjust settings:
1.
Go to the Settings view.
2.
Turn the control knob (1) to browse through the settings groups and parameters.
3.
Select a parameter to be adjusted or changed by pressing the control knob button (1).
4.
Adjust or change the setting by turning the control knob (1).
5.
Close the parameter setting by pressing the control knob button (1).
Some of the settings are e.g. current mode and welding process specific and are visible or not visible in the settings
menu accordingly.
Common welding settings:
Parameter
Welding process
Current limit min
Current limit max
Remote control mode
Remote control min
Remote control max
Wireless remote
© Kemppi
Value
TIG / MMA (Default = TIG)
TIG: 2 A / MMA: 8 A, step 1 A
*
TIG: power source's nominal value
MMA: power source's max.
MMA current, step 1 A
*
OFF / Remote (Default = OFF)
Min = "Current limit min", Max = "Current
limit max"
Min = "Current limit min", Max = "Current
limit max"
Pairing starts automatically when selected
Note
Selecting a welding process changes automatically to the
last active channel for the selected process.
When a remote control is selected, the welding current
adjustment on the control panel is disabled.
New pairing information replaces the old information.
Pairing status is shown as the settings value.
30
Master 315
Operating manual - EN
1921530 / 2052