Kemppi Master 315 Operating Manual page 31

TIG settings:
Parameter
Lift TIG current
Slight upslope
TIG antifreeze
MMA settings:
Parameter
Welding current
Hot start
Arc force
MMA antifreeze
VRD mode
Arc break
System settings:
Parameter
Brightness
Weld data time
Screen saver
Date
Time (24h)
Language
Show Weld Assist
Factory reset...
* Current range adjustable by welder in TIG welding:
• 2 A ... 305 A, 1 A step
• Default = Nominal value of the power source.
* Current range adjustable by welder in MMA welding:
• 8 A ... 305 A, 1 A step
• Default = MMA maximum current of the power source.
"Welding processes and features" on page 45
© Kemppi
Value
5 A ... 40 A / Auto, step 1 A (Default = Auto
= 10 A)
OFF / ON (Default = OFF)
OFF / ON (Default = OFF)
Value
Min/Max = Normal welding current limits
-10 ... +10, step 1 (Default = 0)
-10 ... +10, step 1 (Default = 0)
OFF / ON (Default = OFF)
OFF / ON (Default = OFF)
50 % ... 100 %, step 10 % (Default = 90 %)
Value
10 % ... 100 %, step 1 % (Default = 100 %)
1 s ... 10 s, step 1 s (Default = 5 s)
Default = Kemppi logo
Date setting (DD/MM/YYYY)
Time setting (HH:MM)
Language setting
ON / OFF (Default = ON)
Cancel / Start (Default = Cancel)
Note
Note
This setting can be locked so that the user cannot change it.
In the equipment models where the VRD mode is locked per-
manently to ON (e.g. AU model), the VRD option is still visible
in the settings, but it cannot be changed.
100 % setting uses all of the voltage reserve enabling the
longest arc possible.
Note
An alternative screen saver image can be used. For more
information, refer to
Settings item that activates the factory reset to restore
factory settings on the device.
Once the factory reset is complete, the power source
must be restarted manually.
31
Operating manual - EN
"Screen saver" on page 33 .
1921530 / 2052
Master 315