Table of Contents
Advertisement
1.
Take the foot pedal battery holder out. Install the batteries (3 x AAA) and put the holder back into the foot pedal.
2.
Turn on the Wireless remote in the control panel settings (refer to "Settings view" on page 29).
3.
Keeping the wireless remote close to the power source, long press (3 sec.) the wireless remote pairing button on
the foot pedal.
4.
Once connected, the blue LED next to the button is lit. The green LED blinks when the battery is low.
Tip: You can set minimum and maximum values for the remote current adjustment in the control panel set-
tings.
© Kemppi
17
Master 315
Operating manual - EN
1921530 / 2052
Advertisement
Table of Contents
