Table of Contents
Advertisement
2.
Turn on the Wireless remote in the control panel settings (refer to "Settings view" on page 29).
3.
Keeping the wireless remote close to the power source, long press (3 sec.) the wireless remote pairing button on
the remote.
4.
Once connected, the blue LED on the left of the connection button is lit. The green LED blinks when the battery
is low.
5.
To enable remote operation, select Remote mode in the control panel settings.
Remote control with cable (HR43, FR43)
1.
Connect the remote control cable to the power source.
Wireless foot pedal (FR45)
Refer to the (+) and (-) signs on the battery holder and in the remote for the correct positioning of batteries.
© Kemppi
16
Master 315
Operating manual - EN
1921530 / 2052
Advertisement
Table of Contents
