Table of Contents
Advertisement
2.9 Moving equipment by lifting
If you need to lift the Master welding equipment, pay special attention to the safety measures. Also follow the local
regulations. The Master welding equipment can be lifted with a mechanical hoist when the equipment is installed
securely on the cart.
If a gas bottle is installed on the cart, DO NOT attempt to lift the cart with the gas bottle in place.
DO NOT attempt to lift the equipment with a hoist from the handle.
4 wheel cart (P45MT):
1.
Ensure that the welding equipment is properly secured to the cart.
2.
Connect the 4-legged chain or straps from the hoist hook to the four lifting points on the cart on both sides of
the welding equipment.
© Kemppi
18
Master 315
Operating manual - EN
1921530 / 2052
Advertisement
Table of Contents
