Smtp Server Address - Konica Minolta bizhub C450 Network Scanner Operations
Hide thumbs
Also See for bizhub C450:
- Service manual (780 pages) ,
- Copy operations (608 pages) ,
- Fax manual (390 pages)
Table of Contents
Advertisement
4
SMTP server address
The SMTP server address used to send e-mail can be specified.
1
In the E-Mail TX (SMTP) screen 2/4, touch [Host Address].
The Host Address screen appears.
2
Touch [IP Address Input] or [Host Name Input].
–
To specify the host address with the IP address, touch [IP Address
Input].
–
To specify the host address with the host name, touch [Host Name
Input].
–
If selecting [Host Name Input], check that the DNS settings are
specified correctly before making the selection. For details, refer to
"TCP/IP settings" on page 4-59.
3
Enter the host address (IP address or host name (up to 255
characters)).
–
To edit the values that you entered with "IP Address Input", touch
[ ] or [ ] to move the cursor to the desired area, touch [Delete],
and enter the new value.
–
To clear all values, press the [C] (clear) key.
4
Touch [OK].
The SMTP server address is set.
4-110
Specifying settings from the control panel
bizhub C450 (Phase3)
Hide quick links:
Advertisement
Table of Contents
