To Cancel Automatic Redialing
To cancel automatic redialing, press the
cannot cancel redialing while the LCD displays
waiting to redial). In this case, wait until dialing begins and then press
to cancel redialing. The MultiPASS C5000 asks you to confirm:
STOP
To cancel the redialing, press
LCD displays:
The unit then prints an error report:
Resending a Fax After an Error
If you get an error while sending a fax from memory, the MultiPASS
C5000 can resend it to the same destination without having to rescan
it. To do this, the On Error Resend option must be set in the Advanced:
Send Fax dialog box of the MultiPASS Desktop Manager. See page
8-5 for details.
You can also set how much of the fax is sent again:
The pages following the page on which the error occurred (ERROR
PAGES)
The first page of the document and the pages following that on
which the error occurred (ERROR & FIRST PAGES)
The entire document (ALL PAGES)
N
The fax is erased from memory after it is successfully sent or after the
resending fails.
4-8
Sending Faxes With the MultiPASS C5000
STOP
CANCEL? *YES #NO
*
. The MultiPASS C5000 beeps and the
TX/RX
CANCELLED
TX/RX NO.
XXXX
PRINTING REPORT
button. However, you
(the unit is
AUTO REDIAL
Chapter 4