Scanning From A Windows Application - Canon MultiPASS L6000 Software Manual

3. In the ScanGear window, specify the following preview scan options
for your document as necessary: Scan Mode, Scan Resolution,
Preferences, Page Size, and Black and White options (if applicable).
4. Click Preview.
5. Review the display of the scanned preview image in the scan
window. Adjust the properties of your image as necessary.
6. Replace your document in the document feeder of the MultiPASS
printer.
7. Click Scan.
An indicator displays to track the progress of the scan. Once complete,
the image is stored in the Scan folder, where it remains until you move or
delete it.

Scanning from a Windows Application

You can use the MultiPASS printer to scan documents directly into a
Windows application that supports a TWAIN interface (such as
Photoshop). Some applications allow multiple page scans, while others
do not. If you are unsure whether your Windows application supports
this feature, refer to the user documentation for the application you are
using.
The following instructions summarize the general procedures for
scanning an image. For specific information on scanning with your
Windows application and specifying MultiPASS as the scan device, refer
to the user documentation for the application you are using.
To scan an image from a Windows application:
1. Place the image you want to scan face down in the ADF (automatic
document feeder) of the MultiPASS printer.
2. In your Windows application, select the command to scan a
document.
Chapter 6 Scanning 6-5