Scanning From A Windows Application - Canon MultiPASS C3000 User Manual

Scanning From a Windows Application

You can use the MultiPASS C3000 to scan documents directly into a
Windows application that supports a TWAIN interface (such as Adobe
PageMaker
do not. If you are unsure whether your Windows application supports
this feature, refer to your user documentation for the application.
The following instructions summarize the procedures for scanning an
image. For specific information about scanning with your Windows
application, refer to the user documentation for the application.
1
Feed the
document.
2
In your Windows
application, specify
the MultiPASS as
the scan device.
3
In the
MultiPASS
Scanner dialog
box, specify the
scan options,
and then
click Scan.
The scanned image appears in your application.
6-6 Copying and Scanning With the MultiPASS C3000
). Some applications allow multiple page scans, while others
®
Place the document face down in the ADF.
Normally, you select Acquire and then Select Source from
the File menu. Now you select the MultiPASS.
Then you select Acquire and then Image.
For information on the scan options, see page 6-5.
®
Chapter 6