Adjusting the Preview Image for Final Scan
Once an image has been previewed, you can adjust it, as necessary, for the
final scan by changing its selection size, its output size, aspects of its
orientation, or aspects of its tone. For information on adjusting the tone of
the preview image, see the "Adjusting the Preview Image Tone" section.
Clearing the Preview Area
If the preview image does not serve your purpose, you can quickly remove
it from the preview area and rescan the image.
To remove the current preview image:
On the toolbar, click Clear Preview.
Adjusting the Preview Image View
To make it easier to work with your preview image, you can change
aspects of its display.
Changing the View Size
You can enlarge a preview image to better view its details. Each
enlargement doubles the size of the image up to a maximum of 4 times the
size of the original image.
As you enlarged the image, you can just as easily reduce it. Each reduction
decreases the size of the image by one-half.
To resize a preview image:
1. On the toolbar, click Zoom.
2. To enlarge, left-click the mouse pointer on the image.
To reduce, right-click the mouse pointer on the image.
Chapter 6
Scanning 6-15