Setting Paper Size - Canon MultiPASS C80 Software User's Manual

Colour Matching
This option enables your display to show an image in colours that
best represent the original, by taking into account the display
characteristics of your monitor. If selected, the system uses the colour
profiles specified in the Colour Management tabs of the scanner and
monitor properties.
Since results can vary, it is recommended that you experiment
scanning your image with this option turned on and off. Results can
vary based on the type of image you are scanning and the output of
your final scan.
Change Monitor Profile
Different monitors display colours differently. ScanGear's Colour
Matching enables your system to display colours that best match the
colours scanned based on the type of monitor identified in the
Windows Control Panel.
To change your monitor profile:
1. Click the Change Monitor Profile button.
2. In the displayed monitor list, select your monitor. If your monitor is not
listed, select Canon's RGB v.1.10.

Setting Paper Size

You select a paper size that corresponds to the size of your source
document. If your document does not conform to one of the available sizes,
you can define a custom paper size.
To select a standard paper size:
1. Click the C80/C70 tab.
6-12 Scanning Chapter 6