Table of Contents
Advertisement
Scanning Overview
You can use the MultiPASS printer to scan documents from the Desktop
Manager, or from any TWAIN-compliant Windows application.
When you scan a document in the Desktop Manager, the ScanGear
window displays, allowing you to set certain scanning options and
conditions. This chapter provides instructions on setting scan options
using the ScanGear window.
When you scan a document in a Windows application, the application
may or may not display the ScanGear window. If the ScanGear window is
not displayed, refer to the documentation for the Windows application you
are working in for instructions on setting scan options.
Typically, when you scan a document using the ScanGear window, you
first scan a preview of the document. The preview image enables you to
review the results of your scanned document and make any necessary
adjustments (for example, to size, tone, and so on). When you are satisfied
with the results, you then perform the final scan of the document. The
system then places the final image into the Desktop Manager or your
Windows application.
Features of the ScanGear Window
The section provides an overview of the basics of the ScanGear window.
Detailed instructions for using the various commands and components of
the window are provided in later sections of this chapter.
6-2 Scanning
Chapter 6
Advertisement
Chapters
Table of Contents
