Table of Contents
Advertisement
The Printer Illustration area shows the settings for the current print
mode.
The Description box displays a simple explanation or note about the
selected print mode.
Changing the Print Mode Settings
You can temporarily change the settings of a factory-defined print mode, to
print your current document. You can also define and save a custom print
mode to fit the needs of a particular print job. Once saved, a custom print
mode can be changed and resaved. If you do not save a custom print mode,
it is available only for the current print job.
The following instructions summarise the procedures for changing print
mode settings.
To change print mode settings:
1. In the Printer Properties dialog box, on the Main tab, click the print
mode you want to change. Then click Change.
2. In the Properties dialog box, specify your desired print mode settings
on the Quality and Colour tabs.
3. If you want to save your settings to print future documents, click the
Save tab and save your settings as a custom print mode.
3-34 Printing with the MultiPASS Printer
Super Photo
Click Super Photo when you want to make an exact replica of an
original photo image. Super Photo is most effective when used in
conjunction with the Photo BJ cartridge and high resolution paper.
OHP
Click OHP if you want to print on transparencies.
Draft
Click Draft if you would like to print your document quickly but
with a lower print quality. The Draft print mode is ideal for longer
documents and proofreading purposes.
Chapter 3
Advertisement
Chapters
Table of Contents
