Setting Up The Multipass Printer For Sharing - Canon MultiPASS C80 Software User's Manual

To extract the cabinet files:
Insert your Windows 95 disk into your disk drive. Then enter the
following commands in the MS-DOS window at the MS-DOS prompt
(where D: is your disk drive containing the Windows 95 disk, and
C:\w95print is the driver and folder where you want to extract the
cabinet files):
c:
md \w95print
cd \w95print
d:\win95\extract.exe /e d:\win95\precopy2.cab *.*
d:\win95\extract.exe /e d:\win95\win95_09.cab *.*
d:\win95\extract.exe /e d:\win95\win95_10.cab *.*

Setting Up the MultiPASS Printer for Sharing

Once you have extracted the appropriate cabinet files, you are ready to
setup your MultiPASS printer for sharing.
To set up the MultiPASS printer for sharing:
1. On the MultiPASS server system, on the Windows taskbar, click Start.
2. On the Start menu, point to Settings. Then click Printers.
3. In the Printers window, click the MultiPASS printer icon.
4. On the File menu, click Sharing.
5. In the Properties dialog box, on the Sharing tab, click Shared.
6. In Share Name box, type a name you want to assign to the shared
MultiPASS printer.
7. Under Alternate Drivers, click Windows 95. Then click OK.
B-2 Sharing Your Printer Cross-Platform in Windows NT Appendix B