Adjusting The Preview Image For Final Scan - Canon MultiPASS F50 Software User's Manual

•
4. On the F50 tab (F30 tab), click where you placed the source image you
are scanning:
5. In the Paper Size list, click the size of the source image you are
scanning.

Adjusting the Preview Image for Final Scan

Once an image has been previewed, you can adjust the image and the
area in which it is viewed.
To resize a preview image, to better view its details:
1. On the toolbar, click Zoom.
2. To enlarge the view, left-click the mouse pointer on the image.
To reduce the view, right-click the mouse pointer on the image.
To move an enlarged image:
If the image is too large to see in its entirety, on the toolbar, click Scroll
and drag the zoomed image to display the appropriate section.
80 Scanning
Change Monitor Profile
If the appropriate monitor profile is not displayed, click to change
your monitor profile. Then, in the displayed list, click your
monitor. If your monitor is not listed, click Canon's Default
Profile for Monitors.
Since the quality of your scanned image could be affected if the
correct monitor profile is not selected, changing the monitor
profile enables a better quality scanned image.
6
Chapter 5