Table of Contents
Advertisement
NOTICE FOR CONNECTION TO TELECOMMUNICATION
SYSTEMS IN THE UNITED KINGDOM AND THE
REPUBLIC OF IRELAND
Approval Number 607477
Your Canon MultiPASS C20 has been approved against the
requirements of NTR3 for use in the UK and complies with the
requirements of 91/263 EEC. The CE mark is applied in respect of the
requirements of 72/23 EEC and 89/336 EEC.
It is intended for connection to analogue two wire public
telecommunication networks.
There are two auxiliary sockets to which equipment approved for direct
connection to the network may be connected. If required, a suitable
adaptor, approved under Approval Number NS/G/23/L/100005 for
connections between the fax machine and any piece of approved
telecommunications apparatus, is available from your Canon supplier.
Voltage and current available at these sockets is determined by the
network to which the line cable is connected. They will not normally
exceed the limits for TNV as described in EN60950.
Canon recommend that any additional equipment connected in the
installation is connected to one of these sockets. Do not connect
additional equipment through parallel sockets elsewhere on the
telephone line.
This equipment is not intended or recommended for making calls to
emergency services.
iv
Connect the supplied cable to this socket first, then to the telephone
line.
This socket is intended for connection of a telephone, an answering
machine or similar device.
Preface
Advertisement
Table of Contents
