Cancelling Automatic Redialling
You can cancel automatic redialling by pressing the
However, when you send a fax from memory, you cannot cancel
redialling while the MultiPASS C20 is waiting to redial (AUTO REDIAL
appears in the LCD). Instead, wait until dialling begins (CALLING
appears in the display), then press the
1.
Wait until the MultiPASS C20 begins redialling.
2.
Press STOP. The MultiPASS C20 asks you to confirm that you want
to cancel:
3.
To cancel the redialling, press
alternates the following displays:
Ex:
Redialling with Manual Sending via the Handset
If you are sending a fax manually (using the handset), you can redial by
pressing the
that was dialled with the numeric buttons. (This also starts redialling
regardless of whether automatic redialling is enabled.)
Chapter 3
CALLING
CANCEL?
YES #NO
TX/RX CANCELLED
TX/RX NO.
0002
The unit then prints an error report:
PRINTING REPORT
(REDIAL)/PAUSE button. This redials the last number
(STOP) button.
(STOP) button.
. The MultiPASS C20 beeps and
Sending and Receiving Faxes
3-25