Attaching The Handset To Your Unit - Canon MultiPASS C20 User Manual

Attaching the Handset to Your Unit

To attach the handset to your unit, follow these steps:
1. Use a screwdriver to remove the two covers on the left side of the
unit.
2. Remove the screws from the plugs and insert the plugs in the holes
on the handset cradle.
Type A
Type B
When attaching the handset cradle to your unit, be sure to insert the
screws and plugs in the appropriate holes on the handset cradle.
B-4
Options
HOLES FOR ATTACHING
TO THE MULTIPASS C20
Appendix B