Table of Contents
Advertisement
Press the
mode, and lowercase letter mode.
When you are in number mode, "1" appears
on the right of the display.
When you are in uppercase letter mode, "A"
appears on the right of the display.
When you are in lowercase mode, "a" appears
on the right of the display.
Entering a single letter
For example, you would enter a lowercase letter "b" like this:
1.
Press
ABC
2.
Press 2 twice to display "b" on the left of the display.
2
ABC
2
Entering two letters from the same group
To enter two letters from the same group, you have to use the right
cursor button (> > ). For example, you would enter "AA" like this:
1.
Press
once to display the first "A".
ABC
2
Press the right cursor button (> > ) to enter the "A" and move the
2.
2
cursor to the right.
ABC
3.
Press 2 until the second "A" is displayed.
2
Editing Information
If you make a mistake while entering a name, you can correct it by
using the < < and > > buttons:
You can also press the
information in the current category (date & time, unit name, Unit
telephone, etc.).
2-54
Setting Up Your MultiPASS C20
button to change between number mode, uppercase letter
until an "a" appears on the right of the display.
_
b
until an "A" appears on the right of the display, then press 2
A
A_
AA
Use the > > button to scroll to the incorrect character.
1.
Press the < < button once to erase the character above the cursor.
2.
(The cursor moves one space to the left.)
Press the > > button to move back to the empty space and type
3.
in the correct character.
:a
:a
:A
:A
:A
(STOP) button to cancel and re-enter the
:1
:A
:a
Chapter 2
Advertisement
Table of Contents
