Table of Contents
Advertisement
7.
Hold the cartridge so the label faces outward, tilt it slightly forward
and to the right, then slide it into the cartridge holder.
8.
Lower the green lock lever completely. The BJ cartridge is now
locked into position.
C
Do not try to manually move or stop the cartridge holder, or you may
damage the MultiPASS C20.
2-32
Setting Up Your MultiPASS C20
DO NOT TOUCH THE
GUIDE RAIL
DO NOT TOUCH THE
RIBBON CABLE
DO NOT TOUCH THE
ROUND SHAFT
Chapter 2
Advertisement
Table of Contents
