Polling Sending; Status Monitor; Reports And Lists 3 - Canon FAXPHONE L120 Advanced Manual

Advanced Fax
1
Features

Status Monitor

2
Reports and Lists
3
Troubleshooting
4
Appendix
5
Table of Contents
Index
4.
Use the numeric buttons to enter the time of
transmission (in 24-hour format), then press
[Set].
Ex.
T I M E R = 2 0 : 0 0
Y E S = S E T
5.
Use the numeric buttons to enter a recipient,
or press [Add. Mode] to specify the fax feature
you want to start at the specified time.
<1 BROADCAST>: Broadcasting
<4 POLLING RX>: Polling receiving.
<5 RELAY INITIATE>: Relay initiation.
6.
If required, press [Down] and use the numeric
buttons to enter the subaddress (up to 20
digits).
If no subaddress is required, skip to step 8.
Ex.
S U B = 1 2 3 4 _
P W D = ( T X = S T A R T )
Subsequent screens displayed vary depending on the fax feature
selected.
7.
If required, press [Down] and use the numeric
buttons to enter the password (up to 20 digits).
If no password is required, skip to step 8.
Ex.
P W D = 5 6 7 8 _
( T X = S T A R T )
8.
Press [Start] to scan the document for timer
sending.
Back Previous
■

Polling Sending

Polling sending allows you to send a document in response to
the recipient machine's request.
1.
Load a document.
2.
Press [Add. Mode] twice.
3.
Use [Up/Down] to select <3 POLLING TX?>,
then press [Set].
TOP
Next
1-12