Victoria Arduino Adonis+ 2 Gr Technical Manual page 84

TEMPERATURE UNITY MEASURE SELECTION
The display will read:
TEMPERATURE
By pressing ENTER, the display will read:
TEMPERATURE
FAHRENEIT
or
TEMPERATURE
CELSIUS
Press to modify the measures unit setted.
Press ENTER to confirm and pass to the next step.
Press RESET to return to the previous page without
confirming.
82
KEYBOARD LIGHTING ADJUSTMENT
The display will read:
LIGHT ADJUSTMENT
By pressing ENTER key, the display will read:
KEYS
DISPLAY
With the KEYS light X blinking, select the value of
desired brightness choosing from a minimum value
of 1 to a maximum of 6 by using the
Confirm by pressing ENTER.
The temperature display value Y blinks and with
keys it is possible to set the display lighting Y
from a minimum value of 1 to a maximum of 3.
Press ENTER to confirm and pass to the next step.
Press RESET to return to the previous page without
confirming.
ENTER THE HIDDEN FUNCTIONS
This allows to enter other special functions.
In BRIGHTNESS ADJUST. mode, hold down the 1 long
coffee +
for at least 3 sec to open the special menu.
Now the buttons are for:
RESET (to exit hidden menu).
X
UP/DOWN (to change the parameters).
Y
ENTER (to surf the hidden menu).
Programmable hidden functions list
Self level: with pump - no pump
keys.
( UP/DOWN to switch).
Self level sense: 1 - 2 - 3
( UP/DOWN to switch).
Hot water: with pump - no pump
( UP/DOWN to switch).
Level in delivery: not active - active
( UP/DOWN to switch).
Temperature calibration: -15 - 0 - +15 °C/F
( UP/DOWN to switch).
keys of the FIRST & SECOND group