Victoria Arduino Adonis+ 2 Gr Technical Manual page 69

7. PROGRAMMING
7.1 KEY
1
2 3 4
① LCD Display.
② RESET Key: to turn the machine on and
off and to exit menu.
③ CURSORS Key: to scroll the menu and
to increase and
④
decrease values.
ENTER Key: to access the menu.
⑤
LIST OF DISPLAY FUNCTIONS (USER MODE)
AUTO CLEAN CYCLE
DOSES
POURING COUNT
TOTAL
MACHINE TOTAL
TOTAL WASHES
7.2 PROGRAMMING (USER Mode)
5
Fig. 19
To enter the user mode display environment, hold down
ENTER key for 8 seconds and wait to hear the
the
first acoustic signal.
The machine will read:
AUTO.CLEAN.CYCLE
AUTOMATIC CLEANING CYCLE
The display will show:
AUTO.CLEAN.CYCLE
Press ENTER and the display will read:
AUTO.CLEAN.CYCLE
SELECT
The central key in each unit
on and off. Insert the blind filter (Fig. 2 A06) into
the filter-holder, add half a dose of PULICAFF
and attach the filter-holder into the unit where you
intend to carry out the automatic cleaning cycle.
will begin to flash
67