Victoria Arduino Adonis+ 2 Gr Technical Manual page 74

automatically stop.
In the standard version (without temperature
probe), on pressing the
PROGRAM. DOSES
STEA.SEC.
followed by the amount already set by the manu-
facturers.
Press con the keys to vary the steam delivery
time .
If a new sampling is desired press the
again.
Delivery starts. When the desired dose has been
reached press the button again
The display will show the new value set which can
still be changed by pressing the
Press the ENTER key or go on to a further selection
to terminate the operation.
Press the RESET key to cancel programming.
72
The
the display will read:
TRANSFERRING DOSES
When the display reads:
transferring the set dose to other units is possible by
pressing the
button
. at this point, the continuous coffee keys
second, third and fourth groups will flash as shown
in Fig. 20.
.
Selecting the continuous key
stop flashing and remain lit) will transfer the values
programmed for the first group to the other groups,
one at a time.
button will turn off.
PROGRAM DOSES
SELECT
key. The display will read:
DOSES TRANSFER
SELECT GROUPS
of the
(the key will
Press the ENTER key to confirm.
At this point the display will read:
PROGRAM DOSES
SELECT
Press the RESET or key to exit without confir-
mation.
Fig. 20