Victoria Arduino Adonis+ 2 Gr Technical Manual page 71

Press the keys to view the other functions.
Press the RESET key to quit the display mode.
WASH COUNT
The display will read:
CLEANING COUNTER
The long coffee key for each group
when pressed, the display will show the number of
wash cycles carried out for that particular group.
Press the keys to view the other functions.
RESET
Press the key to quit the display mode.
LIST OF PROGRAMMABLE FUNCTIONS
(TECHNICIAN Mode)
AUTO.CLEAN.CYCLE
DOSE PROGRAM.
DELIVERY COUNT
ACTIVE UNITS *
ON-OFF PROGRAM.
ENERGY SAVING
SETPOINT TEMPERATURE (and OFFSET)
CUP-WARMER PRO.
DATE/TIME
DISPLAY SETTING (and DELIVERING TIME)
DELIVERING IN WASHING MODE
POURING TIME
SETPOINT PRESS.
HISTORICAL ALARM
will flash and
MAINTENANCE
WASH ALARM
LANGUAGE
TEMPERATURE
LIGHT ADJUST
Operation to be carried out EXCLUSIVELY by a
Qualified Technician. Adjustment by NON quali-
fied technicians can invalidate the guarantee.
* T3 version only
° Digit version only
7.3 PROGRAMMING
*
To enter the Technician Mode programming environ-
ment, hold down the
onds and wait for the acoustic signal.
*
°
followed by:
AUTOMATIC CLEANING CYCLE
(TECHNICIAN Mode)
ENTER
key for at least 10 sec-
AUTO.CLEAN.CYCLE
PROGRAM. DOSES
The display will read:
AUTO.CLEAN.CYCLE
69