Victoria Arduino Adonis+ 2 Gr Technical Manual page 78

unit has been confirmed, the function returns to the
main menu.
Pressing the RESET key moves to the next value to
be adjusted; any changes made will not be saved.
SETP G1: Unit 1 temperature
SETP C1: Boiler 1 temperature
SETP G2: Unit 2 temperature
SETP C2: Boiler 2 temperature
SETP G3: Unit 3 temperature
SETP C3: Boiler 3 temperature
SETP G4: Unit 4 temperature
SETP C4: Boiler 4 temperature
OFFSET ADJUSTMENT
When the display reads:
SETPOINT TEMP
Holding down the
first and second units together for a few seconds
will open the OFFSET function.
76
The
various unit boilers.
The ENTER key confirms and passes to the next
value
When the last unit has been confirmed, the function
returns to the main menu
Pressing the RESET key passes to the adjustment
of the next value; any changes made will not be
saved.
OFFS. G1: Group 1 offset
OFFS. C1: Boiler 1 offset
OFFS. G2: Group 2 offset
OFFS. C2: Boiler 2 offset
OFFS. G3: Group 3 offset
OFFS. C3: Boiler 3 offset
OFFS. G4: Group 4 offset
OFFS. C4: Boiler 4 offset
one long coffee keys for the
keys serve to adjust the OFFSET of the CUP-WARMER PROGRAMMING
The display will read:
CUPWARMER PROG.
In the cup warmer section of the list of programmable
hidden functions (see page 77), it is possible to select
one of the following types of cup warmer; single (tradi-
tional), single temperature, double temperature.
Pressing ENTER will open the submenu.
Single Cup Warmer
The display will read:
CUPWARMER PROG.
Pressing ENTER will cause the display to read, for
example:
CUP-WARMER PROG.
ON XX OFF xx