Victoria Arduino Adonis+ 2 Gr Technical Manual page 75

STANDARD DOSES
When the display reads:
DOSES TRANSFER
SELECT GROUPS
we mean to recall the standard dose values.
Press the key.
The display will read:
DEFAULT SETING
SELECT GROUPS
At this point, the continuous coffee keys
begin to flash.
Select one or more continue keys (the key or keys
selected will remain lit up).
The key or keys will recall the selected unit's stand-
ard doses.
Press the ENTER key to confirm.
The display will read:
PROGRAM DOSES
SELECT
Press the RESET or the
firmation.
NOTE: all the selections can be programmed for a maxi-
mum of two minutes; after that time a flashing
message will appear on the display saying:
ERROR
will
DELIVERY COUNT
The display will read:
DELIVERY COUNT
By pressing the ENTER key the display will read:
All the delivery keys will start to flash on and off. By
key to exit without con- pressing one of the delivery keys the amount of the
deliveries made will be visualised.
Hold down the RESET key for 3 seconds to reset.
NOTE: The continuous coffee equals one delivery.
Press
This indicates the total amount of deliveries made.
Hold down the RESET key for 3 seconds to reset.
By pressing the
SELECTION TOTAL
SELECT
key and the display will read:
MACHINE TOTAL
DELIVE. XXXX
key the display will read:
CLEANING COUNTER
73