Using The Side Burner; Manually Lighting The Side Burner - Cal Flame Chef C100B Owner's Manual

USING THE SIDE BURNER

Your new grill has optional side burners equipped with rotary ignite knobs for lighting.
Lighting The Side Burners
1. Remove the burner cover, if any, or any cooking utensils
from the burner grate. Caution: The burner cover may
be hot if the grill burners are in operation.
2. Rapidly rotate the side burner knob counter
clockwise just past the LIGHT position
(You will hear a loud click) to HIGH.
3. If the burner does not light on the first try, repeat
immediately.
4. If the burner does not light after 5 seconds, turn the
control knob to the OFF position. Wait 45 seconds
until the gas clears before attempting to light it again.
5. Repeat the procedure or try "Manual Lighting
procedure" below.
6. Upon successful lighting, adjust the control knob to
desired flame height.
Manually Lighting The Side Burners
1. Remove the burner cover, if any, or any cooking utensils
from the burner grate. Caution: The burner cover may
be hot if the grill burners are in operation.
2. Hold a long stem lit match next to the burner ports.
3. Push in and rapidly turn the control knob counter
clockwise just past the LIGHT position to HIGH.
32
OFF
o
LIGHT
HIGH
LOW
Rev 06/01/2003