Installing Side Burners - Cal Flame BBQ08873P Owner's Manual

Barbecue grills
Hide thumbs Also See for BBQ08873P:
Table of Contents

Advertisement

10

Installing Side Burners

1.
Assemble a 3/8" pipe nipple to the 3/8" pipe
tee using Teflon tape or pipe sealant. Use only
sealant that is approved for use on LP gas.
2.
Install the pipe tee assembly to the grill intake
pipe. Tighten assembly and align the branch
opening of the tee with the hole of the cabinet.
Items Included with Barbecue
1) "T" adapter (3/8")
2) 2 each Hose 3/8" Fittings
3) Regulatorw/ Hose
"T" Adapter (3/8" Threaded)
To grill, located
underneath and
behind grill
From Grill
3/8" Fittings
NOTE: You will need to use a gas rated
sealer on gas connectors that are not flared.
www.calflamebbq.com
Items Included with Barbecue
1) "T" adapter (3/8")
2) 2 each Hose 3/8" Fittings
To side burner, located
3) Regulatorw/ Hose
underneath behind burner.
"T" Adapter (3/8" Threaded)
To grill, located
To side burner, located
underneath and
From Side Burner
underneath behind burner.
behind grill
From Side Burner
To Propane Tank
From Grill
3/8" Fittings
NOTE: You will need to use a gas rated
sealer on gas connectors that are not flared.
GAS LINE
GAS LINE
3.
Connect the flexible hose (male end) to the pipe
tee.
4.
Install and secure the side burner into the island
by simply setting it in place.
5.
Connect the female end of the flexible hose to
the side burner intake pipe.
6.
Connect gas supply to the grill.
7.
Check for gas leaks using soap water solution.
Open barbecue door. Install hose with regulator on propane
A
tank. Then connect other end to "T" adapter. Make sure to
use gas rated tape seal when installing adapter to insure
proper seal.
Grill
Open barbecue door. Install hose with regulator on propane
A
tank. Then connect other end to "T" adapter. Make sure to
use gas rated tape seal when installing adapter to insure
proper seal.
Grill
Then take other end of "T" adapter with hose attached
B
and connect to end of male located underneath and at
the back of the grill. (Use gas rated tape seal on all
connections).
Then take other end of "T" adapter with hose attached
B
To Propane Tank
and connect to end of male located underneath and at
the back of the grill. (Use gas rated tape seal on all
Connect the last open line to the side burner
C
connections).
(Use gas rated tape seal on all connections)
Connect the last open line to the side burner
C
(Use gas rated tape seal on all connections)
C
B
C
B
A
A
2010 Barbecue Grills
LTR20101038, Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents